Advertisement
When using the ADAM-4561, you will simply plug one end of USB
cable (included in package) into ADAM-4561, and the other end into
the USB hub or your host PC.
The model of the ADAM-4561 that you purchased has 10 pin connec-
tor for connecting serial ports on the bottom of module. Only one set
of twisted-pair cables is required to transmit both Data and RTS
signals for RS-485 interface.
Note: In USB v1.1 standard, If you have used the COM3, COM4.....
COMn of host PC. When you plug ADAM-4561 in the host PC, the
COM port will be COMn+1.
ADAM-4561 User's Manual
5
Advertisement
