About The Product; How Does It Work - Aztech HL117 E User Manual

User Manual

About the Product

HomePlug AV is ready to use out of the box and does not require the installation of driver software
to work. It can be connected to computers, routers, gaming consoles, hubs, IPTV set-top boxes,
and other Ethernet devices regardless of operating system.

How Does It Work?

HomePlug AV utilizes the existing electrical wiring in the house as a path to create a secured
network of computers and Ethernet devices. With a maximum data rate of up to 500 Mbps,
HomePlug AV can reliably handle high requirement applications like broadband Internet, high
definition video streaming, and Voice over IP.
HomePlug AV converts digital signals to a complex analog signal that traverses along the electrical
wires. When receiving the analog signal, HomePlug AV converts the analog signal back to digital. To
make the signal secured, a 128-bit AES encryption is applied.
A HomePlug AV device can only communicate with other HomePlug AV devices that use the same
Private Network Name. The Private Network Name can be changed manually using the HomePlug AV
Utility software on a computer with a Windows operating system. When you use the software, you
have to manually type the Private Network Name for the device. Another way to change the Private
Network Name is to use the Simple Connect button. Simple Connect automatically creates an
encrypted Private Network Name. It can also be used to reset the Private Network Name or to add
a device into an existing HomePlug AV network.
Note: HomePlug AV devices from the Twin Pack are already configured to use a common Private
Network Name unique for that pair and are ready to use. The HomePlug AV from a Single Pack, on
the other hand, uses a random Private Network Name. You still need to change its Private Network
Name to allow it to communicate with an existing HomePlug AV network.
Page 5 of 43