Pip, Pop Function - Mitsubishi LDT323V User Manual

Other func tions (c ontinued)
The following table shows the combinations of signal inputs with which the PIP and POP modes function. However, these modes
do not function when the screen size is CUSTOM or REAL .
RGB1
(HDMI)
RGB1 (HDMI)
RGB2 (DVI-D)
RGB3 (D-SUB)
RGB4 (BNC)
DVD/HD (YPbPr)
VIDEO<S>
VIDEO
By pressing the PIP ON/OFF button on the wireless remote control, you can change the PIP, POP, and SIDE BY SIDE modes in the
order shown below.
Alternatively, you can change the modes using the PIP MODE setting of PIP in the OSD main menu. See page 37.
PIP
The resolutions in the PIP, POP, and SIDE BY SIDE FULL modes are as follows:
PIP SIZE
POP SIZE
SIDE BY SIDE FULL
NOTE:
When the PIP, POP, or SIDE BY SIDE FULL mode has been selected, images in the sub picture always
shown above irrespective of the aspect ratio of the input image.
PIP, POP func tion
Sub screen
RGB2 RGB3 RGB4
(DVI-D) (D-SUB) (BNC)
SIDE BY SIDE
ASPECT
POP
< SMALL > : 320 pixels X 240 pixels
< MIDDLE > : 480 pixels X 320 pixels
< LARGE > : 640 pixels X 480 pixels
: 333 pixels X 249 pixels
: 679 pixels X 762 pixels
English-43
DVD/HD
VIDEO<S> VIDEO
(YPbPr)
SIDE BY SIDE
FULL
t the size of each mode
: Supported
: Not supported
OFF