Connecting With A Computer (Analog Connection) - Mitsubishi LDT323V User Manual

P-4 Connec tio n proc edure (c o ntinued)
Connec ting with a c omputer (analog c onnec tion)
Analog c onnec tio n:
Co nnec tio n via RGB3 IN (D-SUB) c o nnec tor
(1) Connect an RGB cable (mini D-SUB 15-pin mini D-SUB 15-pin) (accessory) to the RGB3 IN connector.
(2) Select [RGB3] using the INPUT button on the monitor or the D-SUB button on the wireless remote control.
Co nnec tio n via RGB4 IN (BNC: R G B H V, or R G B Csync , RGB sync o n green) c onnec to r
(1) Use a BNC cable (BNC x 5 - BNC x 5) (commercially available) to connect the BNC connector on the PC, and use a signal
cable (mini D-SUB 15-pin - BNC x 5) (commercially available) to connect the mini D-SUB 15-pin connector on the PC.
(2) Select [RGB4] using the INPUT button on the monitor or the BNC button on the wireless remote control.
Sec o nd mo nitor c onnec tion:
Connect the RGB OUT connector (mini D-SUB 15-pin) on the rst monitor and the RGB3 IN connector (mini D-SUB 15-pin)
on the second monitor using an RGB cable (mini D-SUB 15-pin - mini D-SUB 15-pin) (an accessory of the second monitor or
commercially available).
(The RGB3 or RGB4 signal selected by the rst monitor is output. The RGB1 or RGB2 signal isn t output.)
NOTE:
When different monitors need to be adjusted so that their tint can be identical, such as when using multiple screens, it is
recommended to use a signal distributor (commercially available).
Audio c o nnec tion:
Connect an audio cable ( 3.5 mm stereo mini) (commercially available) to the AUDIO IN1 connector.
Select [AUDIO1] using the AUDIO INPUT buttons on the wireless remote control.
To output audio to the second monitor:
Connect the AUDIO OUT connector on the rst monitor and the AUDIO IN2 or 3 connector on the second monitor using an RCA
cable (audio) (commercially available).
LCD monitor (rear)
LCD monitor (second monitor)
(Multi-connection)
Computer
(Analog RGB)
T o BNC output
RGB c able
RGB3 IN (D-SUB)
(Mini D-SUB 15-pin to
Mini D-SUB 15-pin)
AUDIO IN2 (RCA)
RCA c able (audio)
English-18
T o D-SUB output
RGB c able
(Mini D-SUB 15-pin to
Mini D-SUB 15-pin)
T o audio output
Audio c able
( 3.5 mm stereo mini)
LCD monitor ( rst monitor)
Computer
(Analog RGB)