Mitsubishi LDT323V User Manual page 14

P-1 Preparation fo r installation
Install the monito r o n a at, level, stable surfac e where the
sc reen is easy to view.
(For installation using the option stand.)
Determine the installation loc ation
CAUTION:
DO NOT ATTEMPT TO INST ALL THE LCD MONITOR BY
YOURSELF .
Installing your LCD monitor must be done by a quali ed
technician. Contact your dealer for more information.
CAUTION:
MOVING OR INSTALLING THE LCD MONITOR MUST BE
DONE BY TWO OR MORE PEOPLE.
Failure to follow this caution may result in injury if the LCD
monitor falls.
CAUTION:
Do not mount or operate the monitor upside down, face up, or
face down.
IMPORTANT:
Lay the protective sheet, which was wrapped around the LCD
monitor when it was packaged, beneath the LCD monitor so as
not to scratch the panel.
Ventilation requirements for enclosure mounting
To allow heat to disperse, leave space around the monitor as
shown in the gure below.
CAUTION:
The upper limit of the operation guaranteed temperature range
ensure adequate ventilation to keep the temperature inside
holes in the case.
This LCD has a temperature sensor and cooling fan. If the LCD
becomes hot, the cooling fan will turn on automatically. If the
LCD becomes overheated, the Caution menu will appear.
If the Caution menu appears, stop using the monitor and
allow it to cool. When the LCD monitor is used in an enclosure
or with protection on LCD surface, please check the inside
temperature of the monitor by HEAT STATUS (See page 40). If
the temperature is higher than the normal level, set COOLING
FAN to ON using the SCREEN SAVER function (See page 40).
To avo id the mo nito r from falling
When installing the monitor using the tabletop stands (optional),
take measures to prevent the monitor from falling over in case
of an earthquake or other disaster to lessen the probability of
injury and damage resulting from the fall.
As shown in the gure, secure the monitor to a solid wall or
pillar using rope (commercially available) strong enough to bear
the weight of the monitor. [LDT323V: approximately 14.5 kg (with
the optional stands)]
Use of screw hooks (with opening) is recommended.
360 mm
Screw holes
Clamper
CAUTION:
The effect of the fall prevention substantially depends
on the strength of brackets and base to which the fall
prevention devices is attached. When you cannot ensure
suf cient strength, provide adequate reinforcement.
Though the recommended fall prevention is intended to
lessen the probability of injury and damage, it doesn t
assure its effectiveness against any kind of earthquake or
disaster.
Do not sleep where the monitor may topple over or fall in
case of an earthquake or other disaster.
Before moving the monitor, remove the rope that is
securing the monitor. Failure to do so may result in injury or
breakdown of the monitor.
English-13
Screw hook, etc.
commercially available
Rope, etc.
commercially
available
Screw