Connecting With A Computer (Digital Connection) - Mitsubishi LDT323V User Manual

P-4 Connec tio n proc edure (c o ntinued)
The monitor automatically distinguishes the timings shown in the table below and sets the screen information. When a PC or other
device is connected, it automatically displays images properly.
<Fac to ry preset timing>
Frequency
Resolution
Horizontal
1 640 x 480 31.5 kHz
2 800 x 600 37.9 kHz
3 1024 x 768 48.4 kHz
4 1280 x 768 47.8 kHz
5 1360 x 768 47.7 kHz
NOTE:
When a signal other than 1
Images may not be displayed correctly depending on the video card or driver being used.
Connec ting with a c omputer (digital c onnec tion)
Digital c o nnec tio n:
Co nnec tio n via the RGB1 IN c onnec to r (HDMI)
(1) Connect an HDMI cable (commercially available) to the RGB1 IN connector.
(2) Select [RGB1] using the INPUT button on the monitor or the HDMI button on the wireless remote control.
Co nnec tio n via the RGB2 IN c o nnec to r (DVI-D)
(1) Connect a DVI-D cable (commercially available) to the RGB2 IN connector.
(2) Select [RGB2] using the INPUT button on the monitor or the DVI-D button on the wireless remote control.
Audio c o nnec tion:
Co nnec t an audio c able ( 3.5 mm stereo mini) (c o mmerc ially available) to the AUDIO IN1 c o nnec to r.
Select [AUDIO1] using the AUDIO INPUT buttons on the wireless remote control.
When an HDMI cable is connected, select HDMI audio.
(You can select HDMI only when the video input is [RGB1].)
LCD monitor (rear)
Remarks
Vertical
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz Recommend timing
x is input, characters may be blurred and gures and objects may be distorted.
Resolution
Horizontal
6 1280 x 1024 64.0 kHz
7 1600 x 1200 75.0 kHz
8 1920 x 1080 67.5 kHz
9 1920 x 1200 74.0 kHz
DVI-D c able
HDMI cable
Audio c able
( 3.5 mm stereo mini)
English-19
Frequency
Remarks
Vertical
60 Hz
60 Hz
60 Hz
60 Hz CVT Reduced Blanking
Computer
(DVI-D, HDMI)
T o DVI-D output
T o HDMI output
T o Audio output
LCD monitor