Selec Ting The Video Input - Mitsubishi LDT323V User Manual

U-2

Selec ting the video input

You can select the desired video input using the wireless remote control or the INPUT button on the monitor.
1. Selec t using the INPUT buttons on the wireless remote c ontrol.
You can select the desired video input by pressing the corresponding INPUT button on the wireless remote control.
Selectable video inputs are [RGB1] (HDMI), [RGB2] (DVI-D), [RGB3] (D-SUB), [RGB4] (BNC), [DVD/HD] (YPbPr), [VIDEO<S>], and
[VIDEO].
NOTE:
The [CAT5] and [DISPLAY PORT] buttons don t work.
2. Selec t using the INPUT button on the monitor.
When you press the INPUT button on the monitor, the video input OSD menu is displayed and you can select the video input
using the and buttons.
Selectable video inputs are [RGB1] (HDMI), [RGB2] (DVI-D), [RGB3] (D-SUB), [RGB4] (BNC), [DVD/HD] (YPbPr), [VIDEO-S], and
[VIDEO].
NOTE:
The selection you make doesn t complete unless you press the INPUT button while the OSD information is displayed. See page 39.
RGB1
RGB2
RGB3
RGB4
DVD/HD
VIDEO-S
VIDEO
Video input OSD menu
Select using the
English-25
INPUT button
and buttons.