Travis Industries DVL EF Insert Owner's Manual page 35

3 Install the firebacks following the directions below.
Side Fireback Clip
Make sure the
notches on the side
firebacks fit into the
grooves on the
firebox floor.
Secure the side firebacks by attaching the fireback clips to the
firebox with the screws removed in step "e".
4 Replace the baffle removed in step 2.
Travis Industries
Optional Equipment
f
Secure the upper rear fireback by installing the upper rear fireback clip
d
over the bolts (do not tighten the bolts until the baffle is replaced).
Rest the upper rear fireback on top of the rear
c
fireback brace.
Slide the rear fireback brace over the lower rear
fireback (note how the joggle tilts forward). Place
b
them against the back wall of the firebox and
attach with the screw removed in step a.
a
Remove the screw on the back wall of the firebox.
The rear fireback rests on this ledge at the rear of the firebox.
Remove the screws on both
e
side walls of the firebox.
4 0 4 1 0 2 8
5/16" Nutdriver
1 0 0 - 0 1 1 5 1
3 5