Sip Settings - ATCOM AT840 Quick Start Manual

AT840 AT840 Quick Quick Start Start
AT840 Quick AT840 Quick Start Start Guide
� Enable Web Server: enable or disable web access. If choose "no", you can
not access AT840 webpage.
� Admin password: set admin webpage access password.(username:admin)
� User password: set user webpage access password.(username:user)
� � � � SIP

SIP Settings

SIP SIP Settings Settings Settings
Enter "Account" -> "SIP" page.
� Enable: whether enable this sip register.
Display Name: This name will display on your screen. It will show the User
�
ID instead if leave display name as blank.
� User ID: Username of sip account.
� Authenticate ID: normally is the same with User ID, can also leave it as
blank if there is no special requirement form your sip server.
� Password: Password of sip account.
� Sip Server: SIP server address , support both IP address and domain name.
Sip Port: SIP server port , default is 5060.
�
� Use Outbound Proxy: Whether to use outbound proxy.
� Outbound Proxy Server： Normally the Proxy server is the same as SIP server.
If they are different then fill in the correct information that provided by ISP.
� Outbound Proxy Port: Set your proxy server port.
ATCOM TECHNOLOGY CO., LIMITED
Guide Guide
Guide