ATCOM AT840 Quick Start Manual page 4

AT840 AT840 Quick Quick Start Start
AT840 Quick AT840 Quick Start Start Guide
two feet below:
D. Disassemble the feet:
Press the plate with word "PUSH" and pull the feet with the direction of
arrow. When the plate is pull out of the slot (there will be a sound of "pa")
you can take off the feet
2) On wall position
A. Put the bottom side of the IP phone upside and push the plate with letter
"PUSH" into the slot, please refer the picture as below:
B. Push the other plate into the slot in accordance with the direction of the
arrow
C. Repeat A and B. It is the picture of wall mounting after fixing the two feet
below:
ATCOM TECHNOLOGY CO., LIMITED
Guide Guide
Guide