Configure At840 To Make Voip Calls; Network; Set Password - ATCOM AT840 Quick Start Manual

AT840 AT840 Quick Quick Start Start
AT840 Quick AT840 Quick Start Start Guide
2 2 2 2 、 、 、 、 Configure
Configure Configure Configure AT840
� � � �

Network

Network
Network Network
Enter "Network" -> "Basic" page.
There are 3 ways to connect to the internet DHCP, Static and PPPoE, please
choose one according to your own situation.
� Network mode: you can choose DHCP, Static and PPPoE
� DHCP: AT840 default to use DHCP to obtain dynamic IP.
� Static: If you want to set your ip as static, you should fill ip, netmask,
gateway and DNS information.
� PPPoE: If connect AT840 to modem, you should fill ADSL account and the
password which assigned by your network service provider.
Set password
� � � � Set

Set password

Set password password
Enter "Network" -> "Advance" page.
There are 2 models to set the authority of web accessing and command line:
User model and Admin model. All the parameters can be visible and changed in
Admin mode while part of them can be visible in User mode.
ATCOM TECHNOLOGY CO., LIMITED
Guide Guide
Guide
AT840 to AT840 AT840 to to make to make make VoIP make VoIP VoIP calls VoIP calls calls calls