Speakers - HP G50 Maintenance And Service Manual

3. Remove the Bluetooth module (3).
Reverse this procedure to install the Bluetooth module.

Speakers

Description
Speakers
Before removing the speakers, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Optical drive (see
b. Hard drive (see
c. Keyboard (see
d. Keyboard cover (see
e. Display assembly (see
f. Top cover (see
Remove the speakers:
1. Detach the USB board cable (1) from the right speaker. The USB board cable is attached to the
speaker with double-sided tape.
72 Chapter 4 Removal and replacement procedures
Battery on page 40).
Optical drive on page
Hard drive on page 43)
Keyboard on page 52)
Keyboard cover on page
Display assembly on page
Top cover on page 64)
41)
54)
57)
Spare part number
486632-001