Fan/Heat Sink Assembly - HP G50 Maintenance And Service Manual

Fan/heat sink assembly

Description
Fan/heat sink assembly (includes replacement thermal material)
Before removing the fan/heat sink assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Keyboard cover (see
e. Display assembly (see
f. Top cover (see
g. Speakers (see
h. System board (see
Battery on page 40).
Hard drive on page 43)
Optical drive on page
Keyboard on page 52)
Keyboard cover on page
Display assembly on page
Top cover on page 64)
Speakers on page 72)
System board on page
41)
54)
57)
74)
Component replacement procedures
Spare part number
486636-001
79