Bluetooth Module - HP G50 Maintenance And Service Manual

Reverse this procedure to install the audio board.

Bluetooth module

Description
Bluetooth module (does not include Bluetooth module cable)
Bluetooth module cable
Before removing the Bluetooth module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Optical drive (see
b. Hard drive (see
c. Keyboard (see
d. Keyboard cover (see
e. Display assembly (see
f. Top cover (see
Remove the Bluetooth module:
1. Disconnect the Bluetooth module cable (1) from the system board.
2. Remove the two Phillips PM2.0×6.0 screws (2) that secure the Bluetooth module to the base
enclosure.
Battery on page 40).
Optical drive on page
Hard drive on page 43)
Keyboard on page 52)
Keyboard cover on page
Display assembly on page
Top cover on page 64)
41)
54)
57)
Component replacement procedures
Spare part number
483113-001
486640-001
71