Touchpad Button Board - HP G50 Maintenance And Service Manual

TouchPad button board

Description
TouchPad button board
Before removing the TouchPad button board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Optical drive (see
b. Hard drive (see
c. Keyboard (see
d. Keyboard cover (see
e. Display assembly (see
f. Top cover (see
g. TouchPad on/off button board (see
Remove the TouchPad button board:
1. Remove the four Phillips PM2.0×3.0 screws (1) that secure the TouchPad button board bracket to
the top cover.
2. Remove the TouchPad button board bracket (2).
68 Chapter 4 Removal and replacement procedures
Battery on page 40).
Optical drive on page
Hard drive on page 43)
Keyboard on page 52)
Keyboard cover on page
Display assembly on page
Top cover on page 64)
TouchPad on/off button board on page
41)
54)
57)
Spare part number
486629-001
66)