HP G50 Maintenance And Service Manual page 86

4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Keyboard cover (see
e. Display assembly (see
f. Top cover (see
g. Speakers (see
h. System board (see
Remove the RJ-11 connector cable:
1. Remove the RJ-11 connector from the clip (1) built into the base enclosure.
2. Remove the RJ-11 connector cable (2) from the clips and routing channels built into the base
enclosure.
Reverse this procedure to install the RJ-11 connector cable.
78 Chapter 4 Removal and replacement procedures
Battery on page 40).
Hard drive on page 43)
Optical drive on page
Keyboard on page 52)
Keyboard cover on page
Display assembly on page
Top cover on page 64)
Speakers on page 72)
System board on page
41)
54)
57)
74)