Touchpad On/Off Button Board - HP G50 Maintenance And Service Manual

TouchPad on/off button board

Description
TouchPad on/off button board (includes cables)
Before removing the TouchPad on/off button board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Optical drive (see
b. Hard drive (see
c. Keyboard (see
d. Keyboard cover (see
e. Display assembly (see
f. Top cover (see
Remove the TouchPad on/off button board:
1. Turn the top cover upside down, with the front toward you.
2. Release the ZIF connector on the TouchPad button board to which the TouchPad on/off board
cable is attached, and disconnect the TouchPad on/off board cable (1) from the TouchPad button
board.
66 Chapter 4 Removal and replacement procedures
Battery on page 40).
Optical drive on page
Hard drive on page 43)
Keyboard on page 52)
Keyboard cover on page
Display assembly on page
Top cover on page 64)
41)
54)
57)
Spare part number
486630-001