Cleaning The Parksense System; Parksense System Usage Precautions - Dodge Challenger 2013 Owner's Manual

Hide thumbs Also See for Challenger 2013:
Table of Contents

Advertisement

If "SERVICE PARK ASSIST" or "SERVICE PARK ASSIST
SYSTEM" appears in the EVIC, see an authorized dealer.

Cleaning The ParkSense System

Clean the ParkSense sensors with water, car wash soap
and a soft cloth. Do not use rough or hard cloths. Do not
scratch or poke the sensors. Otherwise, you could dam-
age the sensors.

ParkSense System Usage Precautions

NOTE:
• Ensure that the rear bumper is free of snow, ice, mud,
dirt and debris to keep the ParkSense system operat-
ing properly.
• Jackhammers, large trucks, and other vibrations could
affect the performance of ParkSense .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 191
• When you turn ParkSense off, the instrument cluster
will display "PARK ASSIST SYSTEM OFF." Further-
more, once you turn ParkSense off, it remains off until
you turn it on again, even if you cycle the ignition key.
• When you move the shift lever to the REVERSE
position and ParkSense is turned off, the EVIC will
display "PARK ASSIST SYSTEM OFF" message for as
long as the vehicle is in REVERSE.
• ParkSense , when on, will MUTE the radio when it is
sounding a tone.
• Clean the ParkSense sensors regularly, taking care not
to scratch or damage them. The sensors must not be
covered with ice, snow, slush, mud, dirt or debris.
Failure to do so can result in the system not working
properly. The ParkSense system might not detect an
obstacle behind the fascia/bumper, or it could provide
a false indication that an obstacle is behind the
fascia/bumper.
3

Advertisement

Table of Contents
loading

Table of Contents