Gear Ranges - Dodge Challenger 2013 Owner's Manual

Hide thumbs Also See for Challenger 2013:

Table of Contents

316 STARTING AND OPERATING

Only shift from DRIVE to PARK or REVERSE when the

accelerator pedal is released and the vehicle is stopped.

Be sure to keep your foot on the brake pedal when

moving the shift lever between these gears.

The transmission shift lever has only PARK, REVERSE,

NEUTRAL, and DRIVE shift positions. Manual down-

shifts can be made using the "AutoStick " shift control

(refer to "AutoStick " in this section). Moving the shift

lever to the left or right (-/+) while in the DRIVE

position, or tapping one of the steering wheel-mounted

shift paddles (-/+), will manually select the transmission

gear, and will display that gear in the instrument cluster

as 5, 4, 3, 2, 1.

Gear Ranges

DO NOT race the engine when shifting from PARK or

NEUTRAL into another gear range.

If there is a need to restart the engine, be sure to cycle the

ignition to the LOCK/OFF position before restarting.

Table of Contents