Dodge Challenger 2013 Owner's Manual page 127

To activate the Uconnect
button and follow the audible prompts for directions.
Uconnect Phone sessions begin with a press of the
button on the radio control head.
Cancel Command
At any prompt, after the beep, you can say "Cancel" and
you will be returned to the main menu. However, in a
few instances the system will take you back to the
previous menu.
Pair (Link) Uconnect Phone To A Mobile Phone
To begin using your Uconnect Phone, you must pair
your compatible Bluetooth enabled mobile phone.
To complete the pairing process, you will need to refer-
ence your mobile phone Owner's Manual. The
Uconnect website may also provide detailed instruc-
tions for pairing.
Phone, simply press the
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125
The following are general phone to Uconnect Phone
pairing instructions:
• Press the
button to begin.
• After the "Ready" prompt and the following beep, say
"Device Pairing".
• When prompted, after the beep, say "Pair a Device"
and follow the audible prompts.
• You will be asked to say a four-digit Personal Identi-
fication Number (PIN), which you will later need to
enter into your mobile phone. You can enter any
four-digit PIN. You will not need to remember this PIN
after the initial pairing process.
3