Enabling/Disabling Parksense; Service The Parksense Rear Park Assist System - Dodge Challenger 2013 Owner's Manual

190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Enabling/Disabling ParkSense

ParkSense can be enabled and disabled through the
Customer-Programmable Features section of the EVIC.
The available choices are: OFF, Sound Only, or Sound and
Display. Refer to "Electronic Vehicle Information Center
(EVIC)/Personal Settings (Customer-Programmable Fea-
tures)" in "Understanding Your Instrument Panel" for
further information.
When ParkSense is disabled, the instrument cluster will
display the "PARK ASSIST SYSTEM OFF" message for
approximately five seconds. Refer to "Electronic Vehicle
Information Center (EVIC)" in "Understanding Your
Instrument Panel" for further information. When the
shift lever is moved to REVERSE and the system is
disabled, the EVIC will display the "PARK ASSIST SYS-
TEM OFF" message for as long as the vehicle is in
REVERSE.

Service The ParkSense Rear Park Assist System

When the ParkSense Rear Park Assist System is mal-
functioning, the instrument cluster will actuate a single
chime, once per ignition cycle, and it will display the
"CLEAN PARK ASSIST", "SERVICE PARK ASSIST" or
"SERVICE PARK ASSIST SYSTEM" message. Refer to
"Electronic Vehicle Information Center (EVIC)" in "Un-
derstanding Your Instrument Panel" for further informa-
tion. When the shift lever is moved to REVERSE and the
system has detected a faulted condition, the EVIC will
display the "CLEAN PARK ASSIST" or the "SERVICE
PARK ASSIST SYSTEM" message for as long as the
vehicle is in REVERSE. Under this condition, ParkSense
will not operate.
If "CLEAN PARK ASSIST" appears in the Electronic
Vehicle Information Center (EVIC) make sure the rear
fascia/bumper is clean and clear of snow, ice, mud, dirt
or other obstruction and then cycle the ignition. If the
message continues to appear see an authorized dealer.