Dodge Challenger 2013 Owner's Manual page 83

• N/A — Not Applicable
• ALR — Automatic Locking Retractor
To install a child restraint, first, pull enough of the seat
belt webbing from the retractor to route it through the
belt path of the child restraint and slide the latch plate
into the buckle. Next, extract all the seat belt webbing out
of the retractor and then allow the belt to retract into the
retractor. Finally, pull on any excess webbing to tighten
the lap portion around the child restraint. Any seat belt
system will loosen with time, so check the belt occasion-
ally, and pull it tight if necessary.
To attach a child restraint tether strap:
1. Rotate the cover over the anchor directly behind the
seat where you are placing the child restraint.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81
Tether Strap Mounting
1 — Cover
3 — Attaching Strap
2. Route the tether strap to provide the most direct path
for the strap between the anchor and the child seat.
A — Tether Strap Hook
B — Tether Anchor
2