Installing the Honeywell IP Utility
About the Honeywell IP Utility and Web Client
About the Honeywell IP Utility
Document 800-07067V5 Rev A
07/2013
This chapter describes how to:
•
Install and log onto the IP Utility
•
Connect to a device and configure network settings using the IP Utility
•
Uninstall the IP Utility and/or the Bonjour software
•
Perform firmware upgrades
The Honeywell IP Utility is a software application that is installed from a DVD or
downloaded from the Honeywell Security Group website
(www.honeywellvideo.com/products/cameras/index.html). It is installed on a local
workstation and primarily used by Administrators to configure the equIP
products residing on an IP network.
The IP Utility enables users to:
•
Discover devices on a network
•
Configure the IP network settings, name devices, upgrade firmware, change
passwords.
•
Open individual web client applications for each discovered device.
Updating the Honeywell IP Utility
Honeywell recommends that you regularly check the Honeywell website for the latest
available software updates.
Go to
http://www.honeywellsystems.com/support/download-center/index.html
follow the instructions on the page to logon, find your camera, and then download the
software updates.
3
®
Series of
and
25