Table of Contents
Advertisement
Revisions
Issue
Date
V2 A
11/2011
V3 A
11/2011
V4 A
08/2012
V5 A
07/2013
4
Revisions
Changed 800-07067V1from a User Guide exclusively for HCD5MIH/X. Added the
HCD5HDIH(X) and HCD5MWIH(X) cameras to this User Guide.
Added a note in Chapter 2 advising that the camera should not be connected to two
different power sources at the same. Changed the number of users that can be
logged on at the same time. Changed the length of time required to hold down the
reset button. Added a note in the IP installation section suggesting that all Norton
AntiVirus software be disabled before installing the IP software.
Added the information for installing the Honeywell IP Utility on Windows 7. And added
Frame Rate to the list of available priority settings in the Compression Settings
section.
Removed sentence in Specifications which states that only 4 users can log on at a
time. Removed notes throughout that referred to a limited number of users that can
be logged on at a time. Updated the System Requirements. Added the step for
Enabling Microsoft .NET Framework 3.5 to the Install Honeywell IP Utility Software
section. Expanded on the Disable User Account Control section. Added WDR and
LDC to the Auto Exposure Settings table. Changed the Immunity Regulatory
specification from EN 50024 to 50130-4.
Corrected the description of the Alarm I/O and Audio I/O connectors in the
specifications for HCD5MIH(X) and HCD5WIH(X).
Changed EQUIP to equIP.
Updated the method for connecting to the Download Center website and
downloading the IP Utility.
Updated URLs on back cover.
Updated the method for finding the User Guide.
Changed "Honeywell Camera ActiveX Software" to "Honeywell PSIA IP ActiveX
Software".
Added notes about the removal of the credentials window for V49 or higher.
Updated the descriptions of ELC, ALC, and DSS, and of the descriptions of White
Balance.
Updated Specifications for the cameras, including the minimum illumination for all
cameras, the power consumption, the temperatures for all cameras, the Primary
Stream Resolutions, the AES/ELC .
Moved the "Uninstalling the ActiveX" section from Chapter 3 to Chapter 4, as well as
all Web Client information to Chapter 4.
Updated the Regulatory for all cameras.
Added a note about the automatic installation of a signed version of ActiveX when
users log onto the Honeywell IP Utility for the first time.
Changed the Conformance from LVD 2006/95/EC to GPSD 2001/95/EC.
Changed the selections for and description of DNR.
Added information about D/N Control and Alarm Interlock Day/Night Switching.
Hide quick links:
Advertisement
Table of Contents
