Table of Contents
Advertisement
Document 800-07067V5 Rev A
07/2013
®
HCD5 equIP
Series True Day/Night Network Box Camera Reference Guide
c.
To enable or disable the HTTP server, select or clear the Enable HTTP Server
check box. By default, the HTTP server is enabled. (IP Utility v45 or lower)
d.
From the System tab, click Launch Browser.
The web client application for the selected device opens in Internet Explorer.
Internet Explorer
From Internet Explorer (v6.0+), enter the URL (IP address of the device) in the
Address bar to open the logon window.
2.
Select a User Name and enter a Password.
a.
From the User Name drop-down list, select admin or guest.
b.
In the Password field, enter the case-sensitive password.
The default Administrator password is 1234.
•
•
The default Guest password is guest.
c.
Click
.
Note
A signed version of ActiveX
to discover connected devices for the first time. If you have a previous version
of the IP ActiveX installed, you are prompted to upgrade to a later version
Honeywell PSIA IP ActiveX control.
Figure 3-4
ActiveX Prompt
Click Yes.
3.
Follow the InstallShield Wizard prompts to install the secure Honeywell PSIA IP
ActiveX on your PC.
The InstallShield Wizard Completed message indicates a successful ActiveX
4.
upgrade. Click Finish.
The web client interface opens and live streaming video displays on the monitor.
®
control is installed when you use the web client
35
Hide quick links:
Advertisement
Table of Contents
