Configuration; Osd Color (On-Screen Display) - Barco R9001890 Owner's Manual

Installation Mode

Configuration

What can be done ?
The way of physical installation of the projector can be defined to the projector.
The following installation configurations are possible :
- front/table
- front/ceiling
- rear/ceiling
- rear/table
Set up the Correct Configuration
1 Push the cursor key é or ê to highlight 'Configuration' (menu 1).
2 Press ENTER to select.
3 Push the cursor key é or ê to highlight the desired configuration.
4 Press ENTER to select.
For more information, see Projector configuration in chapter 3 : 'Installation Guidelines'.
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
CONVERGENCE
CONFIGURATION
OSD COLOR
INTERNAL PATTERNS
NO SIGNAL
LENS
QUICK ACCESS KEYS
MENU POSITION [DEFAULT]
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1

OSD color (On-Screen Display)

What can be done ?
The highlighted items on the menus can be displayed in red, green or yellow.
How to change this color setting ?
1 Push the cursor key é or ê to highlight 'OSD Color' (menu 1).
2 Press ENTER to select.
3 Push the cursor key é or ê to desired color (menu 2).
4 Press ENTER to select.
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
CONVERGENCE
CONFIGURATION
OSD COLOR
INTERNAL PATTERNS
NO SIGNAL
LENS
QUICK ACCESS KEYS
MENU POSITION [DEFAULT]
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
8-4
OSD COLOR
HIGHLIGHTED ITEM
RED
GREEN
YELLOW
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 2
5976229 BARCOSLM G5 10052001