Preset Input Balance; Diagnosis - Barco R9001890 Owner's Manual

Preset Input Balance

Warning
Changing these settings may seriously affect the performance of the projector.
How to start up ?
1 Push the cursor key é or ê to highlight 'Preset Input Balance' (menu 1).
2 Press ENTER to select.
When Preset Input Balance is selected in the Service Mode selection menu, the following warning will be displayed :
Preset Input Balance is reserved to qualified service personnel.
If you are not qualified, press EXIT to cancel the preset input balance.
SERVICE
BARCO LOGO
ADD-INS
PRESET INPUT BALANCE

DIAGNOSIS

MORE...
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
Diagnosis.
What can be seen ?
The diagnosis menu gives the possibility to select an overview of the I²C controlled IC's and an overview of the working of the formatter.
How to select diagnosis ?
1 Push the cursor key é or ê to highlight 'Diagnosis' (menu 1).
2 Press ENTER to select.
The diagnosis menu will be displayed (menu 2).
SERVICE
BARCO LOGO
ADD-INS
PRESET INPUT BALANCE
DIAGNOSIS
MORE...
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
5976229 BARCO SLM G5 10052001
WARNING
PRESET INPUT BALANCE
is reserved to
qualified
service personnel
<ENTER> to accept
<EXIT> to return.
menu 2
DIAGNOSIS
I2C
FORMATTER
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 2
Service Mode
9-9