Table of Contents
Advertisement
Change Language
Start Up
1
Push the cursor key é or ê to highlight 'Change Language' (menu 1).
2
Press ENTER to display the language selection menu (menu 2).
Available languages : English
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
SERIAL COMMUNICATION
LAMP
MORE...
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
Change Projector Address
How to change that address ?
1
Push the cursor key é or ê to highlight 'Change Proj. Address' (menu 1).
2
Press ENTER.
The Change Projector Address menu will be displayed and the actual address will be filled in.
The first digit is highlighted (menu 2).
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
SERIAL COMMUNICATION
LAMP
MORE ...
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
Entering the new projector address.
1
the digit keys on the RCU or the local keypad or
2
use the control disc to the right or to the left to select a digit and change the value by pushing the control disc up or down until the
new value is reached. Continue with the other digits on the same way.
Serial Communication
Start Up the Serial Communication menu
1
Key é or ê to highlight 'Serial Communication' (menu 1).
2
Press ENTER to display the Serial Communication menu (menu 2).
The baudrate, interface standard and termination can be installed.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
SERIAL COMMUNICATION
LAMP
MORE...
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
5976229 BARCO SLM G5 10052001
CHANGE LANGUAGE
ENGLISH
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 2
CHANGE PROJ. ADDRESS
Enter new address
001
Select with ç or è
Reprogram with é or ê
or numeric keys
<ENTER> to confirm
<EXIT> to return
menu 2
SERIAL COMMUNICATION
PROJECTOR ADDRESS 001
BAUDRATE [115200]
INTERFACE STANDARD [RS232]
RS422 TERMINATION [ON]
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 2
Service Mode
9-5
Advertisement
Table of Contents
