Table of Contents
Advertisement
How to set up the Clamp mode?
1. Push the ↑ or ↓ keys to highlight Clamp.
PICTURE TUNING
COLOR BALANCE
CONTRAST MODULATION
SYNC: FAST
PEAKING
CLAMP MODE: NORMAL
PORT 2:
VIDEO
LINE MULTIPLIER
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-16
2. Press ENTER to toggle between Normal or Restoration.
Normal
Restoration
6.4.7
Port 2 Video/S-Video (Optional)
What can be done?
Port 2 can be used as Video or S-Video input.
This menu item is only available when the projector is equipped with a Decoder + Limo Pro (R9828631) and if
an S-Video source is selected.
How to configure Port 2?
1. Push the ↑ or ↓ keys to highlight Port2.
PICTURE TUNING
COLOR BALANCE
CONTRAST MODULATION
SYNC: FAST
PEAKING
CLAMP MODE: NORMAL
PORT 2:
VIDEO
LINE MULTIPLIER
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-17
2. Press ENTER to toggle between Video or S-Video.
6.4.8
Line Multiplier settings (Optional)
Overview
•
Starting up Line Multiplier settings
•
Motion Processing On/Off
•
Output Mode
•
Video Equalizing
•
Noise Reduction
•
Contrast Enhancement
•
Split Screen On/Off
•
Advanced Settings
R5976398 BARCOREALITY 909 SPLIT PACK 21/02/2003
For all standard sources and all sources with a backporch > 0.8 µs or for sources with noise and
spikes in the signal.
For standard sources with a backporch between 0.4 µs and 0.8 µs or for sources with sync
separate or sync on green.
6. Random Access Adjustment Mode
35
Advertisement
Table of Contents
