Configuring Ep Sensors; Ep-35 Temperature Configuration - Lowrance LMS-527cDF iGPS Installation And Operation Instructions Manual

To turn on/off Backlight Synchronization:
1. Press
MENU
2. Highlight
B
on/off Backlight Synchronization.
3. Press repeatedly to get back to the main display.
EXIT

Configuring EP Sensors

All configurable devices are configured through their Device Configura-
tion menus, which may be accessed through the network devices list on
the Bus Configuration menu.

EP-35 Temperature Configuration

To input Device Name:
1. Press
MENU
NMEA 2000 menu will appear with five options: Bus Setup, Fuel Man-
agement, NMEA 2000 Alarms, Waypoint Sharing and Backlight Syn-
chronization.
2. Highlight
B
ration menu. A list of network devices will be at the top of the page.
3. Select the temp sensor you want to rename and press
vice Configuration menu will appear with the Device Name dialog box
highlighted.
and use ↑ ↓, ← → to input the desired name for the temp
4. Press
ENT
sensor. Press
play.
To select Temp Type:
1. Press
MENU
NMEA 2000 menu will appear with five options: Bus Setup, Fuel Man-
agement, NMEA 2000 Alarms, Waypoint Sharing and Backlight Syn-
chronization.
2. Highlight
B
ration menu. A list of network devices will be at the top of the page.
3. Select the desired temp sensor and press
tion menu will appear.
4. Highlight
T
will appear: Water, Outside, Inside, Engine Room, Cabin, Live Well,
Bait Well, Refigeration, Heating System and Unknown.
5. Highlight the desired Temp Type and press
firmation message will appear: Are you sure you wish to change this
device's configuration?
6. Highlight
Y
main display.
| , select
MENU
S
ACKLIGHT YNCHRONIZATION
| , use ↑ ↓ to select
MENU
and press
S
US ETUP
. Press
ENT EXIT
| , use ↑ ↓ to select
MENU
and press
S
US ETUP
and press
T
EMP YPE
and press
ENT
ES
and press
NMEA 2000
and press
NMEA 2000
, which will open the Bus Configu-
ENT
repeatedly to get back to the main dis-
NMEA 2000
, which will open the Bus Configu-
ENT
. The following list of Temp Types
ENT
. Press
EXIT
212
.
ENT
, which will turn
ENT
and press
and press
. The Device Configura-
ENT
. The following con-
ENT
repeatedly to get back to the
. The
ENT
. The De-
ENT
. The
ENT