Tank Select; Tank Size; Set Configuration Button - Lowrance LMS-527cDF iGPS Installation And Operation Instructions Manual

Tank Select

The Tank Select menu allows you to choose from up to three tanks
(Port, Center and Starboard), depending on the Engine-tank configura-
tion that has been selected. This allows you to set up each tank indi-
vidually.

Tank Size

The Tank Size menu allows you to input the size of a selected tank in
gallons. After selecting the desired tank from the Tank Select menu,
you are ready to enter the tank's size.

Set Configuration button

The Set Configuration button is used to finalize engine-tank configura-
tion settings.
Setting Engine-Tank Configuration:
1. Press
MENU| MENU
2. The NMEA 2000 menu will appear with five options: Bus Setup,
Fuel Management, NMEA 2000 Alarms, Waypoint Sharing and Back-
light Synchronization. Choose
3. Select
E
NGINE
& Tank Configuration menu with the following configuration options: 1
Engine/1 Tank, 1 Engine/2 Tanks, 2 Engines/1 Tank, 2 Engines/2
Tanks, 3 Engines/1 Tank, 3 Engine/3 Tanks and Unconfigured Bus.
1 Engine/1Tank highlighted on Engine and Tank Configuration
menu (left). Starboard highlighted on Tank Select menu (center).
4. Choose the configuration that matches the number of engines and
tanks on your vessel and press
5. Highlight
T
menu.
6. Select the tank you want to set up and press
light the Tank Size dialog box and press
, use ↓ ↑ to highlight
& T C
ANK ONFIG
Tank Size set to 40 gallons (right).
and press
S
ANK ELECT
NMEA 2000
and press
B S
US ETUP
and press
ENT
.
ENT
, which will open the Tank Select
ENT
ENT
206
and press
.
ENT
, which will open the Engine
. Press → to high-
ENT
.
.
ENT