Reset Options - Lowrance LMS-527cDF iGPS Installation And Operation Instructions Manual

Ping Speed Control Bar set to its default setting (right).
To change Ping Speed:
1. From the Sonar Page, press
2. The Ping Speed Control Bar appears. Press ↑ to increase ping speed;
press ↓ to decrease speed. When it's set at the desired level, press
To adjust Sensitivity:
1. From the Sonar Page, press
2. The Sensitivity Control Bar appears. Press ↓ to decrease sensitivity;
press ↑ to increase sensitivity. When it's set at the desired level, press
. (When you reach the maximum or minimum limit, a tone sounds.)
EXIT
To turn off HyperScroll:
1. From the Sonar Page, press
2. The Ping Speed Control Bar appears. Press ↓ to decrease ping speed
to 50 percent. When it's set at the desired level, press
When you boost ping speed and switch into HyperScroll, the width of
the FasTrack bar graph display doubles in width at the right side of the
screen. This allows you to better see the virtually instantaneous sonar
returns, just as you would on a flasher sonar unit. For more informa-
tion on FasTrack, see its entry in this section.

Reset Options

This command is used to reset all features, options and settings to their
original factory defaults. This is useful when you have changed several
settings and want to return the unit to basic automatic operation.
1. Press
MENU
2. Press ← to
Sonar Menu with Ping Speed selected (left).
| |↓ to
MENU S
| .
Y ENT
ES
|↓ to
MENU
| .
MENU ENT
|↓ to
MENU
|
S ENT
YSTEM ETUP
79
|
P S ENT
ING PEED
|
P S ENT
ING PEED
EXIT
|↓ to
R
ESET
.
.
EXIT
.
.
| .
O ENT
PTIONS