Fishtrack; Frequency (Change Frequency) (Lms-527Cdf Only) - Lowrance LMS-527cDF iGPS Installation And Operation Instructions Manual

To turn the Fish I.D. feature on:
1. From the Sonar Page, press
2. Press → to
To turn off Fish I.D., repeat the instructions in step 2.

FishTrack™

The FishTrack feature shows the depth of a fish symbol when it ap-
pears on the display. This lets you accurately gauge the depth of tar-
gets. This feature is available only when the Fish I.D. feature is on. The
default setting for FishTrack is off.
To turn on FishTrack:
(Note: These instructions will turn on FishTrack and Fish I.D. at the
same time.)
1. From the Sonar Page, press
2. Press →|then press ↓ to
To turn off FishTrack, repeat the instructions in step 1. Turning off
FishTrack in this manner will not turn off Fish I.D. symbols.
Sonar Features menu with Fish I.D. Depths selected on dual-frequency
menu (left). When the check box to the left is checked, the feature is on.
Sonar Page with Fish I.D. symbols and FishTrack depths turned on
Frequency (Change Transducer Frequency)
(LMS-527cDF only)
The LMS-527cDF transducer can operate at both 200 kHz and 50 kHz.
The 200 kHz frequency has a 12° cone angle and the 50 kHz frequency
has a 35° cone angle.
|
F S ENT
ISH YMBOLS
|↓ to
MENU
| |
EXIT EXIT
|↓ to
MENU
|
F D ENT
ISH EPTHS
(right).
72
S F
ONAR EATURES
.
S F
ONAR EATURES
| | .
EXIT EXIT
Symbols with
FishTrack depths
| .
ENT
| .
ENT