Lowrance LMS-527cDF iGPS Installation And Operation Instructions Manual page 183

NOTE:
You also can remove data directly from the Data Viewer menu by
repeating the steps used to add overlay data. Highlight the overlay
data currently displayed, then press
tion, which will remove it from the display..
Overlay Data Shown, with Date option selected (left). Press ENT to ac-
cess R option (center). Press ENT again to remove item and return
EMOVE
To move overlaid data:
You may find it useful to move or rearrange overlay data on your dis-
play.
1. From one of the Map Pages, press
2. You will see a list of the overlay data currently displayed. Select the
item you want to move and press
3. The data begins to flash on your screen. Use ↑ ↓, ← → to move the
data to a new location on the screen.
4. Press |
EXIT
NOTE:
The Customize command and the Overlay Data command both use
the same information categories. The difference between the two
commands is that Customize changes only the data in digital data
boxes, while Overlay Data changes the data on the floating freely
on the screen but does not alter data in digital data boxes. For in-
formation on customizing digital data boxes see Customize Page
Displays on page 86.
to Overlay Data Shown (right).
to return to the map display.
EXIT
, unchecking the data op-
ENT
|↓ to
MENU
|→ to
ENT M
OVE
173
|
O D
VERLAY ATA
| .
ENT
.
ENT