Mounting The Picatinny Adapter To The Atn; Atn Ps-15 With Ir450 - ATN PS-15 Operator's Manual

C. MOUNTING THE PICATINNY AdAPTER TO THE
ATN PS-15
Mount Picatinny adapter(A) onto one of the rails on the goggles.
Tighten two fixing screws(B) of the adapter.
A
B
Figure 3-3
Mounting the Picatinny Adapter to the ATN PS-15
d. MOUNTING IR450 TO THE ATN PS-15
IR450 may be mounted on the goggles through the Picatinny
adapter.
1. Install the Picatinny Adapter on one of the goggles rails (See
3.1.F).
2. Loosen the IR450 fixing screw.
3. Mount the IR450 on the Picatinny Adapter and tighten the
fixing screw.
Figure 3-4

ATN PS-15 with IR450

3-4