Table of Contents
Advertisement
see the green LeD lit. By pushing the buttons
"+" and "-" you may adjust the Ir brightness.
the Ir beam is focusable to change the
field of coverage. to change the beam width
slightly turn the Ir lens.
You could change the Ir control panel fit-
ting your needs. the screw-tool from the
kit should be used for weakening the clamp
located on the Ir. rotate the Ir placing it in
the most convenient position. tighten the
clamp with the screw-tool to fix the new posi-
tion.
cAmerA ADApTer
to use your night raven with a 35mm camera or camcorder you will need the following:
1) If you plan to use a camcorder then your camcorder must have a MaCro feature. Most
modern camcorders today have a MaCro feature built-in.
2) If you plan to use a 35mm camera, you will need a MaCro lens. If you don't have one, we
advise that you contact your local camera store.
3) You may or may not need a SteP-UP or SteP-DoWn ring in order to adapt the camera
adapter to your lens. note: the camera adapter comes with 37mm and 52mm threads. If you
need other sizes your local camera store should be able to help.
• Remove one of the rubber eyecups from the Night Raven
• Screw the camera adapter onto the front of the lens on your Video camera's lens or your
35mm camera's lens.
• Loosen the three set screws on the camera adapter.
• Place the camera adapter over the Night Raven's eyepiece.
• Tighten the three set screws to fit snugly to the Night Raven's eyepiece
• You may need to focus the 35mm camera or video camera in combina-
tion with the night raven in order to get the sharpest possible image.
• We suggest that you find an open space to work in. Focus the Night
raven so that the scene is at its sharpest. for best results you should
disable the auto focus (if any) on either the 35mm camera or the video
camera and manually focus the 35mm camera or the video camera.
once the image is sharp, then simply adjust the night raven's front lens
to change focus.
* An important part to remember is that you are not taking a picture of an object that is far away
from you, but you are actually taking a picture of a phosphorous screen of the Night Raven that
is only 2-3 inches away.
sTorAge AnD cAre
• If the device will not be in use for extended period of time (more than 10 days) remove the
battery.
• Avoid touching of lenses. If fingerprints or traces of dirt or dust appear, clean their surface
with a Photographic lens cleaning tissue.
• Keep lens caps/daylight filters on when not in use.
• The Night Raven is not harmful to the user or the environment.
• Do not disassemble except to clean the front lens and eyepiece: it will void your warranty.
Battery
housing
adapter
Clamp
( opTionAl)
Ir Brightness adjustment
Ir elevation
Ir Windage
Ir focusing
4
Advertisement
Table of Contents
