Neckpad Reinstallation - ATN PS-15 Operator's Manual

B. NECKPAd REINSTALLATION
During operation of the goggles, it is possible for the neckpad to
become separated from its position on the headband. Perform
the following procedures to reinstall the neckpad.
1. Lift the upper headband strap retention tab (see Figure 6-1),
allowing the neckpad strap to be inserted underneath.
2. Slip the neckpad strap all the way under the upper strap reten-
tion tab and then pull the lower part of the neckpad strap under
the lower strap retention tab.
3. Repeat steps 1 and 2 for the other side of the headband and
neckpad if necessary.
Figure 6-1

Neckpad Reinstallation

6-11