Bright Spots And Emission Points - ATN PS-15 Operator's Manual

rejection, warranty or repair please ATN or point of purchase for
warranty/repair procedures.
1. Bright Spots.
A bright spot is a small, non-uniform, bright area that may flicker
or appear constant (Figure 5-3).
Not all bright spots make the ATN PS-15 rejectable. Cup your
hand over the lenses to block out all light. If the bright spot
remains, return the ATN PS-15. Bright spots usually go away
when the light is blocked out. Make sure any bright spot is not
simply a bright area in the scene you are viewing. Bright spots
are acceptable if they do not interfere with the ability to
view the outside scene.
2. Emission Points.
A steady or fluctuating pinpoint of bright light in the image
area and does not go away when all light is blocked from the
objective lenses of the goggles (Figure 5-3). The position of
an emission point within the image area does not move. Not all
emission points make the ATN PS-15 rejectable. Make sure any
emission point is not simply a point light source in the scene
Figure 5-3

Bright Spots and Emission Points

5-4