Table of Contents
Advertisement
you can see the green LED lit. By pushing
the buttons "+" and "-" you may adjust the IR
brightness.
The IR beam is focusable to change the
field of coverage. To change the beam width
slightly turn the IR lens.
You could change the IR control panel fit-
ting your needs. The screw-tool from the
kit should be used for weakening the clamp
located on the IR. Rotate the IR placing it in
the most convenient position. Tighten the
clamp with the screw-tool to fix the new posi-
tion.
5X lenS
The additional 5X Lens for Night Spirit transform it to
5X night vision monocular.
To install 5X lens unscrew the objective lens of Night
Spirit and screw 5X Lens instead of it.
camera adapter
To use your Night Spirit with a 35mm camera or camcorder you will need the following:
1) If you plan to use a camcorder then your camcorder must have a MACRO feature. Most
modern camcorders today have a MACRO feature built-in.
2) If you plan to use a 35mm camera, you will need a MACRO lens. If you don't have one, we
advise that you contact your local camera store.
3) You may or may not need a STEP-UP or STEP-DOWN ring in order to adapt the camera
adapter to your lens. NOTE: The camera adapter comes with 37mm and 52mm threads. If you
need other sizes your local camera store should be able to help.
• Remove the rubber eyecup from the Night Spirit
• Screw the camera adapter onto the front of the lens on your Video ca-mera's lens or your
35mm camera's lens.
• Loosen the three set screws on the camera adapter.
• Place the camera adapter over the Night Spirit's eyepiece.
• Tighten the three set screws to fit snugly to the Night Spirit's eyepiece
• You may need to focus the 35mm camera or video camera in combina-
tion with the Night Spirit in order to get the sharpest possible image.
• We suggest that you find an open space to work in. Focus the Night
Spirit so that the scene is at its sharpest. For best results you should
disable the auto focus (if any) on either the 35mm camera or the video camera and manually
focus the 35mm camera or the video camera. Once the image is sharp, then simply adjust
the Night Spirit's front lens to change focus.
* An important part to remember is that you are not taking a picture of an object that is far away
from you, but you are actually taking a picture of a phosphorous screen of the Night Spirit that is
only 2-3 inches away.
(optional)
Battery
Housing
Adapter
Clamp
(optional)
IR Brightness Adjustment
IR Elevation
IR Windage
IR Focusing
5X Lens
4
Advertisement
Table of Contents
