On/Off; Using Your Keypad; Focusing; Mounting On A Tripod - ATN BinoX 4K 4-16x Manual

ON/OFF

Power button for 15 seconds to reboot the binocular.

USING YOUR KEYPAD

The KEYPAD is programmed to be used in two different ways.
Shortcut from any position. Use the down arrow button from any menu
screen to exit to the Home Screen by pressing and holding down the rear­
most down arrow for a few seconds.

FOCUSING

DIOPTER ADJUSTMENT
DIOPTER
ADJUSTMENT
RING
FOCUS
ADJUSTMENT RING
8
To TURN ON the device,
press the POWER button.
To TURN OFF the device,
press and hold the POWER
button, until "Shut down the
device?" appears in the dia-
log box. Choose "Yes" to turn
off.
If the binocular freezes or
stops responding to the con-
trol panel. Press and hold the
• Short and Quick Taps — used for most
functions and to get around the menu.
• Press and Hold — designed to be used
in the following situations — ON/OFF,
SHORTCUT MENU.
• You can use the forward and rearward
keys (zoom keys ), while in the System
Menu, as UP and DOWN buttons.
NOTE
Using LEFT or RIGHT buttons in the
Menu. You can quickly choose Exit
By rotating the Diopter Adjustment
Ring you will achieve optimal sharpness
for your vision. Look through the eye-
piece while focusing on the widgets on the
screen.
NOTE
Once the Diopter Adjustment is set
to your liking, adjustment will not need
to be performed unless another user
altered the focus for their needs.
DISTANCE FOCUS
Rotate the Adjustment Ring, as neces-
sary, to achieve the proper focus at vari-
ous distances.
INTERPUPILLARY ADJUSTMENT
Each eyepiece moves laterally to adjust for interpupillary spacing.
MOUNTING
ON A TRIPOD
The BinoX 4K is tripod mount-
able and can be mounted on tri-
pods with a 1/4-20 thread mount.

COMPASS CALIBRATION

When the compass needs to
be calibrated the word "CAL" ap-
pears instead of the Compass
Scale. To calibrate you should ro-
tate the device on three axis as
pictured on the right.
NOTE
After calibrating the device
please remember that the com­
pass will work best when hold­
ing the BinoX 4K parallel to the
ground.
Other possible abbreviations:
• ERR — an error was detect-
ed;
• SMF — your device is under Strong Magnetic Field;
• UPD — your firmware needs to be updated.
9