Operating Sequence - Eoek62Ak - Electrolux EOEM61AS, EOEE62AS,EOEE63AS User Manual

Operating sequence –
electronic touch control (EOEK62AK)
Setting the oven function
1. Switch on the appliance by pressing the "On/Off".
The oven lights will light.
2. Press the "Function" as many times as necessary until
the desired function appears. The suggested cooking
temperature appears in the display and the degrees
symbol "°" flashes. If the suggested temperature is not
changed within approximately 5 seconds the degrees
symbol "°" stops flashing and the oven begins to heat.
The suggested temperature display is replaced with
the oven centre temperature and a thermometer icon.
The thermometer icon rises slowly, indicating the
degree to which the oven is currently being heated.
Changing the oven temperature
1. Press the or , to decrease or increase the temperature.
Note:
• T he temperature can only be adjusted when the degrees
symbol "°" is flashing. The temperature setting changes
in increments of 5°C. To change the temperature after
the degrees symbol "°" stops flashing, press the "function"
and then press the or to change the temperature.
electrolux e:line ovens operating sequence – electronic touch control (EOEK62AK) 17
Using Fast Heat Up (FHU) mode
To quickly and efficiently preheat your oven, it is
recommended to select the "Fast Heat" cooking feature.
1. Set the oven function and temperature as described in
the previous section.
2. Press the "Fast Heat". The letters "FHU" will appear on
the temperature display.
3. When the set temperature is reached the buzzer will
sound and the set temperature will be displayed.
Note:
• " fHU" cannot be selected if the oven centre temperature
is above the preset temperature.