Operating Sequence - Rotary Control Oven; Cooking With The Timer - Rotary Control Oven - Electrolux EOEM61CS User Manual

8 operating sequence – rotary control oven electrolux e:line ovens
Operating sequence –
rotary control oven
Select the cooking function
• T urn the function selector in any direction to the desired
cooking function. The oven cavity light will come on.
Select the temperature
• T o set the temperature, turn the temperature selector in
a clockwise direction to the desired setting. An indicator
light above the temperature selector will come on.
• A thermostat controls the temperature in your appliance.
When the temperature is reached, the heating source
switches itself off and the indicator light goes out. When
the oven temperature falls below the desired setting,
the heating source switches on and the indicator light
comes on again.
• O nce the food is cooked, turn the temperature selector
back in an anti-clockwise direction. Do not force it right
round in a clockwise direction as this will result in
damage to the thermostat.
Note:
• T he desired cooking function must be selected before
the oven will operate.
Temperature estimations
If a recipe calls for Fahrenheit (°F) or no actual
temperatures, use the following table to determine the
temperature (°C).
oven temperature°C temperature°F
Low heat
Cool 80 175
Very slow 100-110 210-230
Slow 130-140 265-285
Moderate heat
Moderately slow 150-160 300-320
Moderate 170-180 340-355
Moderately hot 190-200 375-390
High heat
Hot 200-210 390-410
Very hot 220-230 430-450
Extremely hot 240-250 465-480
tips and information
Pre-heating
For best cooking results you must pre-heat your oven
and grill. Pre-heating your appliance allows it to reach the
required temperature quickly and efficiently as well as cook
your food at the correct temperature for the entire cook time.
1. With 'Rapid Heat' function
This function allows your oven to reach preset temperature
quicker than any other cooking function. Turn the function
selector to 'Rapid Heat', then set the desired temperature,
by rotating your oven temperature selector.
When the indicator light above the temperature selector
goes out, the oven has reached the desired temperature.
Select the oven function you require for cooking and place
the food in the oven.
2. With other oven functions
Set the desired temperature by rotating your oven temperature
selector. When the indicator light goes out the oven has
reached the desired preset temperature, place your food in
the oven, close the door and set the timer if you desire.
3. With 'Grill' function
Pre-heat the grill for at least 3 minutes to obtain best
results. This will help to seal the natural juices of steak,
chops and other meats for a better flavour.
tips and information
Your built-in appliance is fitted with a cooling fan. This
prevents your kitchen cabinet from overheating and
reduces the condensation inside the oven. It will operate
whenever you are using your oven and blow warm air
across the top of the oven door.
Condensation
• E xcess condensation may fog the oven door. This may
happen when you are cooking large quantities of food
from a cold start. You can minimise condensation by:
– Keeping the amount of water used whilst cooking to
a minimum.
– Making sure the oven door is firmly closed.
– B aking custard in a baking dish that is slightly smaller
than the water container.
– Cooking casseroles with the lid on.
Note:
• I f you are using water in cooking, this will turn to steam
and may condense outside your appliance. This is not
a problem or fault with your oven.
electrolux e:line ovens cooking with the timer – rotary control oven 9
Cooking with the timer –
rotary control oven
Your oven is equipped with a 3 button timer that has the
following features:
• T imer – you can set a countdown time that will beep
when the set time has elapsed.
• C ook time – you can set cooking duration. A timer will
count down the preset cooking time, beep when the
time has elapsed and turn the appliance off.
• E nd time – instead of setting a cooking duration you can
set a cooking finish time. When the finish time has been
reached the timer will beep and turn the appliance off.
• D elayed start cooking time – you can combine the
cooking time and end cooking time to switch oven on
and off at a specific time during the day.
Selecting the timer
• P ress the MODE button until the timer 'indicator'
begins flashing.
• S et the countdown time you want by using the
buttons. 5 seconds after the last change the timer
'indicator' will stop flashing and the countdown will start
in minutes.
• To stop the beeper, press any button.
cook time timer
end time clock
MODE
Setting the cooking duration
• Select the desired oven function and temperature.
• T he oven indicator light will glow and the heating source
will come on.
• P ress the MODE button until the cook time 'indicator'
begins flashing.
• S et the cooking duration you want by using the
buttons. Five seconds after the last change the cook
time 'indicator' will stop flashing, and the time of day will
be displayed.
Note:
• Remember to add pre-heating time if necessary.
cook time timer
end time clock
MODE
Setting the cooking end time
1. Check that the clock displays the correct time of day.
2. Select the desired oven function and temperature.
The oven indicator light will glow and the heating
source will come on.
3. P ress MODE button until the end time 'indicator'
begins flashing.
4. Enter the time of day you want to finish cooking by
pressing or buttons. Five seconds after the last
change, the end time 'indicator' will stop flashing and
the current time of day will be displayed.
cook time
end time
MODE
Setting the delayed start cooking time
• S et the cook time and end as described in the
and previous sections.
• O nce both the cook time and end time have been set,
the cook time and the end time 'indicators' will stop
flashing and the current time of day will be displayed.
To check or cancel settings
• T o check your settings, press the MODE button until the
setting you want is displayed. A red light will flash next
to the mode (cook time, end time etc) that is currently
on display.
• T o cancel "delayed start" press the MODE button until
a light flashes next to "end time". Press and hold the –
button until the clock no longer reverses (you will hear
a beep). If you have left the temperature and function
knobs at a setting the oven will start once the "end time"
light stops flashing.
• T o cancel "auto shut off" press the MODE button until
a light flashes next to "cook time". Press and hold the –
button until the clock no longer reverses (at 0:00 you will
hear a beep). This automatically cancels "delayed start".
If you have left the temperature and function knobs at
a setting, the oven will start once the "cook time" light
and stops flashing. Because you have cancelled "auto off"
the oven will continue to heat until you manually turn it
off.
On completion of cooking
• T he heat source will turn off, the timer will beep and the
end time and/or cook time 'indicators' will flash.
• E ven though the heating element turns off the oven will
still retain substantial heat. This will continue to cook the
food until it is removed or the oven cools down. If you
do not plan on being present when the oven turns off,
you should take this extra heating time into account.
• T urn the function and temperature controls to the off
position.
• Press any button to stop the timer beeping.
Adjusting the clock
• P ress the MODE button until the clock 'indicator'
begins flashing.
• P ress the or buttons to change the time of day.
5 seconds after the last change, the clock 'indicator'
will disappear, confirming the time has been adjusted.
timer
clock