Fujitsu PRIMERGY BX920 S3 Operating Manual page 50

Starting up and operation
I/O indicators* (green)
– Lights up to indicate a network connection.
– Flashes to indicate an active network connection.
– Does not light up if there is no network connection.
* The three I/O fabrics of the server blade are:
– Fabric 1: onboard CNA controller
– Fabric 2: mezzanine card 1
– Fabric 3/4: mezzanine card 2
ID card
You can pull out the ID card (see
push it back in again.
The ID card contains various system information, such as the product name,
serial number, order number, MAC addresses and DNS name.
50
figure 8 on page
Operating Manual
47) as far as it will go and
BX920 S3