Fujitsu PRIMERGY BX920 S3 Operating Manual page 29

V
CAUTION!
In emergencies (e.g. damaged casing, control elements or power
●
cable, penetration of liquids or foreign bodies), switch off the device
immediately, unplug it from the grounded power outlets, and contact
your customer service center.
Proper operation of the device (in accordance with IEC 60950-
●
1/EN 60950-1) is only ensured if the casing is fully assembled and the
rear covers for the installation bays are in place (electric shock,
cooling, fire protection, interference suppression).
Install only system extensions that satisfy the requirements and rules
●
governing safety, electromagnetic compatibility, and
telecommunications terminal equipment. If you install other
extensions, you may damage the system or violate these safety
regulations. You can find out which system extensions are suitable
from the customer service center or your sales outlet.
The components marked with a warning label (e.g. lightning symbol)
●
may only be opened, removed or exchanged by authorized, qualified
personnel. Exception: CSS components can be replaced.
If you cause a defect on the device by installing or exchanging system
●
extensions, the warranty will be invalidated.
Only set the resolutions and refresh rates specified in the operating
●
manual for your monitor. Otherwise, you may damage the monitor. If
you are in any doubt, contact your sales outlet or customer service
center.
BX920 S3
Operating Manual
Important Information
29