Instructions For Connecting/Disconnecting Cables - Fujitsu PRIMERGY BX920 S3 Operating Manual

Figure 5: Ports on the front
1 USB connector (2x)
2 VGA connector
5 Front USB port
I
The Y-cable is delivered with the system unit.
5.4 Instructions for connecting/disconnecting
cables
V
CAUTION!
Be sure to read the documentation for the peripheral devices before
connecting them.
Do not connect or disconnect data cables during a thunderstorm.
When removing a cable, always hold it by the plug. Never unplug a cable
by pulling at the cable itself.
BX920 S3
3 Plug connection to the server blade. The labeled
side of the plug must face left when plugged in.
4 Y-cable connector on the server blade
Operating Manual
Hardware installation
43