Ce Conformity - Fujitsu PRIMERGY BX920 S3 Operating Manual

Switch off the system and remove the power plugs from the power outlets
●
before installing or removing components with ESDs.
You must always discharge static build-up (e.g. by touching a grounded
●
object) before working with such components.
Any devices or tools that are used must be free of electrostatic charge.
●
Wear a suitable grounding cable that connects you to the external chassis
●
of the system unit.
Always hold components with ESDs at the edges or at the points marked
●
green (touch points).
Do not touch any connectors or conduction paths on an ESD.
●
Place all the components on a pad which is free of electrostatic charge.
●
I
For a detailed description of how to handle ESD components, see the
relevant European or international standards (EN 61340-5-1,
ANSI/ESD S20.20).
Other important information:
During cleaning, observe the instructions in section
●
Blade" on page
Keep this operating manual and the other documentation (such as the
●
Upgrade and Maintenance Manual, documentation DVD) close to the
device. All documentation must be included if the equipment is passed on to
a third party.
4.2

CE conformity

The system complies with the requirements of the EC directives
2004/108/EC regarding "Electromagnetic Compatibility" and
2006/95/EC "Low Voltage Directive". This is indicated by the CE
marking (CE = Communauté Européenne).
BX920 S3
59.
Operating Manual
Important Information
"Cleaning the Server
33