Cleaning The Server Blade - Fujitsu PRIMERGY BX920 S3 Operating Manual

6.4

Cleaning the Server Blade

V
CAUTION!
Switch off the server blade and remove it from the system unit (see
page 40).
Do not clean any interior parts of the server blade yourself; leave this job
to a service technician.
Do not use abrasive powder or detergents which dissolve plastic to clean
the housing exterior.
Make sure that no liquid gets inside the device and that the ventilation
slits on the ServerBlade remain open.
Wipe the server blade housing with a dry cloth to clean. If it is very dirty you can
use a damp cloth that has been dipped in water with a mild detergent and well
wrung out.
BX920 S3
Operating Manual
Starting up and operation
59