Matrox Avio F125 User Manual page 17

Connector
*
DVI-D SL
Headphones
Line-in
Line-out
Main USB
Microphone
PS/2 keyboard
PS/2 mouse
* While using a Dual-Link display resolution (such as 2560 x 1600) with the
connectors of your units, the
Description
Using the DVI-D cable provided with your
transmitter unit, connect the secondary
graphics connector of your graphics hardware
to this connector on your transmitter unit.
Note: Your Avio unit only supports digital input
signals.
Connect your headphones to this connector.
This connector supports a 3.5 mm stereo jack.
While headphones are connected, the line-out
connector remains enabled.
Connect the line-out connector of your
computer (host) or of another audio device
(local or remote) to this connector. This
connector supports a 3.5 mm stereo jack.
Connect the line-in connector of your computer
(host) or of another audio device (local or
remote) to this connector. This connector
supports a 3.5 mm stereo jack.
Use the USB cable provided to connect your
computer to your transmitter unit. This
connection is required to use supported USB
devices on your transmitter and receiver units.
Note: For host systems that don't support
keyboards and mice through a USB hub at
startup, you need to use the dedicated USB
connectors if you're using a USB keyboard and
mouse.
Connect your microphone to this connector.
This connector supports a 3.5 mm stereo jack.
Connect your PS/2 keyboard to this connector.
Host: To be able to connect your computer to
the host PS/2 keyboard connector on your
transmitter, you need a male-to-male PS/2
cable. To purchase this cable, see the Matrox
online store (shopmatrox.com).
Connect your PS/2 mouse to this connector.
Host: To be able to connect your computer to
the host PS/2 mouse connector on your
transmitter, you need a male-to-male PS/2
cable. To purchase this cable, see the Matrox
online store (shopmatrox.com).
DVI SL and VGA+DVI SL connectors are disabled.
Required host
connection
Line-in
Line-out
Line-in
Line-out
PS/2 keyboard
PS/2 mouse
DVI SL/DL and VGA+DVI SL/DL
Matrox Avio Series – User Guide 17