Matrox Avio F120
Host connections
7
Dedicated USB connections are
only required if, when starting,
your host system can't detect a
USB keyboard or mouse on your
receiver unit.
PS/2 connectors
Mouse and keyboard PS/2
connectors at the front of your
transmitter and receiver units are
supported only if the system is
connected to the mouse and
keyboard PS/2 connectors at the
back of your transmitter unit.
32
Matrox Avio Series – User Guide
6
DVI-D
Dedicated USB connections
Main USB connection
3
4
LC-LC Duplex
fiber optic cable
2
Optional local
Local connections on your transmitter unit are
optional and are similar to the ones supported on
your receiver unit.
Front
Transmitter
Back
12 VDC
2.5A Max
12 VDC
2.5A Max
Back
Receiver
Front
Connection setup
1
Connect your monitors to your units.
2
Connect your keyboard and mouse to
your units.
Connect your fiber optic cable.
3
Connect the USB cable to your host
4
system and your transmitter unit (main
USB connection).
5
Connect the power supply of your units.
6
Connect the graphics hardware of your
host system to your transmitter unit.
7
Turn on your host system.
5
5
1