Avio F125 Receiver - Back; Connector Descriptions - Matrox Avio F125 User Manual

Avio F125 Receiver – Back

Connector descriptions

Note: A required host connection is the connection on your transmitter unit required to support
this connector on both your transmitter (TX) and receiver (RX) units, or on either your transmitter
(TX) or receiver (RX) unit.
Connector
12V DC power
input
Dedicated USB
links
DVI-D SL/DL
10 Matrox Avio Series – User Guide
Debug
Description
Connect the 12V DC power supply included
with your product to this connector. While the
12V DC power supply is connected to the unit
and electrical socket, the power LED (
active (green).
For host systems that don't support keyboards
and mice through a USB hub, connect your host
system to the dedicated mouse and keyboard
connectors on your transmitter unit to support a
keyboard and mouse on your receiver unit. A
USB A to mini-B cable is required to connect to
each of these connectors. To purchase these
cables, see the Matrox online store
(shopmatrox.com).
Note: This connector doesn't support USB 3.0
connections. You must use USB 2.0
connections.
*
Using the DVI-D cable provided with your
transmitter unit, connect the primary graphics
connector of your graphics hardware to this
connector on your transmitter unit.
Note: Your Avio unit only supports digital input
signals.
VGA+DVI SL/DL
(remote)
SFP+ VGA+DVI SL
(remote)
) is
*
12V DC
power input
Required host
connection